The Ultimate Maintenance Checklist for Skylights in Western Australia’s Climate

Start with a quick visual inspection

• Look for signs of condensation or water stains around the ceiling area.
• Check the glass for cracks, chips or scratches.
• Make sure there’s no mould or mildew forming near the frame.
• From the outside, check seals and flashings are secure and watertight.

Clean the skylight glass

• Use a soft cloth or sponge with mild, non-abrasive detergent.
• Avoid high-pressure hoses which can damage seals.
• If you have VELUX skylights, open them fully to access exterior panes safely (from the inside).
• Rinse thoroughly and wipe dry to avoid streaking.

Clear debris from gutters and flashing

• Remove leaves, dirt and branches from gutters near your skylight.
• Trim any overhanging branches that drop debris onto the roof.
• Inspect flashing to ensure it’s not lifting or deteriorating.

Check and clean insect screens and blinds

• Dust with a microfibre cloth or use a soft brush vacuum attachment.
• Avoid using water on blinds unless they’re designed for wet cleaning.
• Inspect for any wear or tear and note any frayed cords or fabric.

Lubricate moving parts

• Use a silicone-based spray (not grease) on moving parts.
• Operate the skylight after lubricating to distribute evenly.
• Check for smooth, quiet opening and closing.

Check your warranty and schedule a pro inspection

• Catch small issues early before they become big problems.
• Keep your manufacturer’s warranty valid.
• Provide peace of mind during WA’s storm season.

Protect your investment year-round

• Maintain energy efficiency and thermal performance.
• Prevent avoidable damage from dust, heat and weather.
• Extend the life of your skylight system.

Schedule expert skylight servicing across WA